- Export from File, Export, IFC; the built-in setups cannot be edited, so duplicate one and save your settings with the project.
- IFC 2x3 Coordination View 2.0 is the most widely read; IFC4 Reference View is newer, and Autodesk notes its MEP certification is still in progress.
- Linked models export as separate IFCs, or into one IFC project or site, depending on one setting.
- Archive the RVT, an IFC and the export log together; add NWC files if your coordination ran in Navisworks.
Revit to IFC at a glance: settings and sources
Every setting below is taken from Autodesk's own documentation or the buildingSMART standard pages, read on the date shown. Menu names match recent Revit versions; older releases may label them slightly differently.
| Setting or rule | What the source says | When to use it | Source and date checked |
|---|---|---|---|
| File tab, Export, IFC | "Click File tab Export (IFC)", choose a file name and a setup, then Export | Every export | Autodesk Revit Help, 20 Nov 2026 |
| IFC 2x3 Coordination View 2.0 | The "default certified version of export, and the latest version generally supported by other systems" | Coordination and exchange with most other tools | Autodesk Revit Help, 20 Nov 2026 |
| IFC4 Reference View | "Intended as a reference model which is not modified" | Handover and viewing, where the recipient does not edit | Autodesk Revit Help, 20 Nov 2026 |
| Linked files | Do not export, export as separate IFCs, or export in the same IFCProject or IFCSite | Federated MEP and architecture models | Autodesk Revit Help, 20 Nov 2026 |
| IFC 4.3 ADD2 | Published as ISO 16739-1:2024, status "Official" | Infrastructure and new projects whose tools support it | buildingSMART, 20 Nov 2026 |
| Model View Definitions | Subsets "known as Model View Definitions (MVDs)" | Pick the MVD the receiving software is certified for | buildingSMART, 20 Nov 2026 |
Sources: Export a Model to IFC, IFC Export Setup Options, buildingSMART IFC specifications and buildingSMART on MVDs.
How do you export IFC from Revit, step by step?
Revit IFC export needs no extra software. Autodesk documents the steps as follows.
- Open the model and, if you want to export only part of it, open a 3D view that shows just that part.
- Click File tab, Export, IFC.
- In the Export IFC dialog, click Browse next to File name, pick the target folder and name the file.
- Under Current selected setup, choose a built-in setup or your own saved one.
- Click Modify setup to check the IFC version, linked files, property sets and level of detail.
- Click Export. Revit writes the IFC and a log file to the target folder; read the log for skipped elements.
Autodesk notes there are built-in setups that "cannot be modified or deleted, but they can be duplicated to customize the IFC setup". Changes to the In-Session Setup "are not saved between sessions", so save a named setup for each project and each recipient. Autodesk also ships an updated IFC add-in through its app store and as open-source code on GitHub, which replaces the built-in exporter with the latest fixes. Sources: Export a Model to IFC and Customize the IFC Setup.
Which IFC version and MVD should you choose: IFC2x3 or IFC4?
Choose what the recipient can read. IFC is the open standard maintained by buildingSMART and published by ISO as ISO 16739-1, described as "an open international standard for information used in Building Information Modeling (BIM)". Each version comes with Model View Definitions, subsets of the schema for a use. ISO notes that different implementation levels "are referred to as a Model View Definition (MVD)", and software is certified per MVD. Sources: ISO 16739-1:2024 and buildingSMART.
Autodesk describes IFC 2x3 Coordination View 2.0 as the setup most other systems support, and IFC4 Reference View as a model meant to be viewed, not edited. For MEP teams, one line in Autodesk's add-in notes matters: the IFC4 Reference View is certified for architectural and structural exchange, while "MEP export and Import are still on-going". If a mechanical subcontractor or facility manager will open your model in another tool, test both versions with them first. buildingSMART itself warns that "MVDs have frequently deviated from the intended semantics of the IFC specification", so two tools that both claim IFC4 support may still disagree. Sources: Revit IFC add-in help and buildingSMART on MVDs.
What are the Revit IFC export settings and IFC parameters?
The Modify Setup dialog has tabs for general settings, additional content, property sets, level of detail and advanced options. These are the ones that change what an MEP model looks like on the other side.
- Property sets: "Export Revit property sets" includes Revit-specific sets based on parameter groups; "Export IFC common property sets" adds the standard Pset_ sets other tools expect.
- Schedules as property sets: "The name of the schedule is the property set name; the column names are the IFC parameter names." This is how equipment schedules reach the IFC.
- User-defined property sets and parameter mapping: point the exporter to a text file that maps your shared parameters to IFC properties.
- Split walls, columns and ducts by level: divides multi-level elements by building story, which helps facility teams.
- Level of detail: higher settings give more accurate pipe fittings, elbows and spaces at the cost of file size.
- Store the IFC GUID: writes the generated GUIDs back to the Revit elements, so later exports keep the same IDs. Save the model afterward.
IFC parameters in Revit are the ones that control classification. Revit maps each category to an IFC class; Autodesk's example is that a wall exports as IfcWallStandardCase "because the wall is an element from the wall category". For a family that should export as something else, set "Export to IFC As" and "IFC Predefined Type" on the type or instance. Sources: IFC Export Setup Options and Specify IFC Entities for Families.
How do you export IFC from Revit with linked models?
MEP models usually live as links in a federated project, so the linked files setting decides what the recipient gets. Autodesk lists four choices: do not export links; "Export as separate IFCs", where each linked file becomes its own IFC "with the correct positioning relative to the host file"; export all links into the same IFCProject; or export them into the same IFCSite.
Separate files are easier to update one trade at a time. One combined file is easier to hand to a facility manager who wants a single model. Two cautions from Autodesk's add-in notes: linked IFC files are re-exported, "so may suffer data loss on roundtrip", and the toolkit that writes IFC files has a practical size limit of "about 1.5 GB". Large hospitals and campuses may need to be split by building or trade. Sources: IFC Export Setup Options and Revit IFC add-in help.
What gets lost in a Revit IFC export, and how do you fix common errors?
An IFC carries geometry, classification, properties and relationships. It does not carry Revit's parametric behavior: families, constraints and view settings stay in the RVT. Opening an IFC back in Revit creates a new model, and Autodesk notes that later changes to the original IFC "are not reflected in the Revit model". That is why the RVT stays the master.
- Elements missing: check the view used for "Export only elements visible in view"; Autodesk notes that "Elements temporarily hidden using temporary hide/isolate are not exported".
- Wrong IFC class: fix the category mapping or the Export to IFC As parameter, not the geometry.
- Model in the wrong place: set the Coordinate Base (shared coordinates, survey point, project base point or internal origin) to match the other trades.
- Files too large: lower the level of detail, export by trade, or allow mixed solid models, which Autodesk warns can leave the file "not strictly within the standard IFC MVDs".
- Properties missing: turn on common property sets or schedules as property sets, and read the export log.
What is an MEP model archive worth to AI companies?
Native Revit MEP models with systems, sizing and schedules are rare training data for AI that drafts, checks or coordinates building services. AI companies pay $20K to $5M for company records, depending on volume, history, rights and how clean the data is. An archive of many projects, with the RVT, the IFC and the coordination history, is worth more than a few exports. Our guide to licensing MEP Revit models to AI covers the engineering firm's side, and who owns architectural drawings explains how the standard agreements split ownership between designer and client.
We help you license your data. Origin Data Partners is an independent data partner that helps business owners value and license their company records: the company pays Origin nothing, and a buyer may pay Origin when a deal completes. Describe the archive first: number of projects, years, building types, Revit versions and whether consultants' models are in the files. Then check what your models may be worth. Not the owner? Advisers can introduce the company.
How we checked this
We read every source on this page on 20 November 2026: Autodesk's own Revit and Navisworks help pages, the help for Autodesk's IFC add-in and its open-source repository, the buildingSMART International standards pages on IFC versions and Model View Definitions, and ISO's official record for ISO 16739-1:2024.
What we could not verify: how every third-party IFC viewer reads a given Revit export, which varies by tool and version; the menu labels in Revit releases older than 2025; and the status of MEP certification for IFC4 beyond Autodesk's own note that it is still in progress.
Common questions
Can you export an IFC from Revit?
Yes. Revit has IFC export built in: click File tab, Export, IFC, choose a file name and an IFC setup, and click Export. Revit writes the IFC file and a log of the export to the same folder. Autodesk also offers an updated IFC add-in with recent fixes, which replaces the built-in exporter and uses the same dialog.
What is the Revit IFC exporter?
It is the part of Revit that writes IFC files, and Autodesk publishes its code as open source. Autodesk states that Revit provides certified IFC import and export based on buildingSMART standards. Revit exports IFC 2x3 and IFC4 setups, and it can open or link files in IFC4, IFC2x3, IFC2x2 and IFC2x. Certification differs by view: Autodesk notes the IFC4 Reference View is certified for architecture and structure, with MEP still in progress.
How to convert Revit to IFC file online?
The reliable way is Revit itself, through File, Export, IFC, because only Revit reads every family and parameter in an RVT. Online converters upload your model to someone else's server, which may breach your client agreement or confidentiality terms, and they may not support your Revit version. If you have no Revit license, ask whoever owns the model to export the IFC for you.
What are IFC parameters in Revit?
IFC parameters are the Revit parameters that control how an element is written to IFC. The main ones are Export to IFC, which can force an element in or out, Export to IFC As, which sets the IFC class, and IFC Predefined Type. Exported values sit in property sets: Revit's own sets, the IFC common sets, schedules exported as sets, or user-defined sets from a mapping file.
Can you import an IFC file into Revit?
Yes. Open an IFC to create a new Revit model from it, or link it with Insert tab, Link IFC to use it as a reference. A linked IFC can be reloaded when the source changes; an opened one cannot. Revit builds an intermediate RVT, a log and a shared parameters file when linking. The result is not a native model: walls and ducts will not behave like Revit families.
What file types can Revit export?
Autodesk's export help lists IFC (as plain IFC, IFC XML or zipped versions of both), CAD formats, DWF, ODBC databases, gbXML for energy analysis, 3ds Max, images and HTML views, all from the File tab, Export menu. With the Navisworks exporter installed it also writes NWC files. Which format to use depends on who receives the model and whether they need to edit it.
Is IFC a CAD file?
Not in the usual sense. IFC is an open data schema for building information, published as ISO 16739-1, that describes objects such as walls, ducts and pumps with their properties and relationships. CAD files such as DWG mainly hold lines and shapes. Most BIM and many CAD tools can read IFC, but an IFC is closer to a structured database of the building than a drawing.
Should an MEP firm archive IFC or RVT if it may license the models later?
Both. The RVT keeps the families, parameters and schedules, and native Revit MEP models with systems and schedules are scarce training data for AI companies. The IFC is the open copy any certified tool can still read. AI companies pay $20K to $5M for company records, depending on volume, history, rights and how clean the data is. Value rises with the number of projects, the years covered and how complete the files are, and falls where client contracts limit reuse. See the guide to licensing MEP Revit models to AI.
Sources and further reading
- Autodesk Revit Help: Export a Model to IFC
- Autodesk Revit Help: IFC Export Setup Options
- Autodesk Revit Help: Customize the IFC Setup
- Autodesk Revit Help: Specify IFC Entities for Families
- Autodesk: Revit IFC 2026 add-in help (Revit Exchange)
- Autodesk Revit Help: Link an IFC File
- Autodesk Revit Help: Using IFC Files
- Autodesk Revit Help: Exporting to Industry Foundation Classes (IFC)
- Autodesk Navisworks Help: Revit File Exporter
- Autodesk Revit Help: Publish to NWC
- buildingSMART International: IFC Schema Specifications database
- buildingSMART International: Model View Definitions (MVD)
- ISO 16739-1:2024, Industry Foundation Classes (IFC), Part 1: Data schema
- Autodesk on GitHub: revit-ifc, the open-source IFC exporter for Revit
