An Xactimate estimate is a line-by-line price for repairing property damage, written in Xactimate, the estimating software from Verisk that insurers, adjusters and restoration contractors share. Each line has a code, a description, a quantity and a unit price. The summary adds overhead and profit, then subtracts depreciation to get from replacement cost value (RCV) to actual cash value (ACV).
- Read the line items first: code, description, quantity, unit of measure and unit price.
- Overhead and profit are added as percentages on top of the line items, not built into unit prices.
- RCV minus depreciation is ACV. The deductible comes off after that.
- ESX is the working file. A PDF is only a picture of the estimate.
What is Xactimate?
Xactimate is property claims estimating software from Verisk. Verisk describes it as a way to "create accurate, professional estimates for property claims and restoration work, with sketching, scoping, localized pricing, and reporting on desktop, online, and mobile" (Verisk).
It matters to a restoration business because the other side of the claim uses it too. In Verisk's words, "carriers, independent adjusters, and restoration contractors all estimate from the same platform". When a contractor and an adjuster disagree about a job, they are usually comparing two Xactimate estimates line by line.
Xactimate is a registered trademark of Xactware Solutions, Inc., a Verisk company (Verisk). This page explains how an estimate is laid out. It does not reproduce any price list data.
How do you read an Xactimate estimate?
Start with the line items, grouped by room or area. Verisk's certification outline lists the parts of an estimate item: "Category code, Selector code, Activity, Description, Calculation, Unit Price, Unit of Measure" (Verisk certification outline). Then read the summary at the end, where markups, tax and depreciation are applied.
Unit prices come from a price list for the area. According to Verisk, each price list item "contains the labor, material, and equipment components that make up the unit cost" (Verisk). Prices in a real estimate depend on the price list and date chosen for the job, so two estimates for the same work can differ only because of that setting.
| Part of the estimate | What it tells you | What to check |
|---|---|---|
| Category and selector codes | Which price list item the line uses | Does the item match the material and grade actually on site? |
| Activity | What is being done with the item | Is removal counted once, not twice? |
| Description | The item in words | Read it fully; similar items differ by one word |
| Calculation and quantity | How the amount was measured, often from the sketch | Do room dimensions and openings match the building? |
| Unit of measure | Square feet, linear feet, each, hours and so on | A wrong unit changes the total by a large factor |
| Unit price | Labor, material and equipment for one unit | Which price list and month was used? |
| Overhead and profit | General contractor markup, shown as percentages | Is it applied, and to which items? |
| Depreciation | Reduction for age and wear, per line or in total | Is it marked as recoverable under the policy? |
| RCV and ACV | Replacement cost value and actual cash value | ACV should equal RCV minus depreciation |
On overhead and profit, Verisk says general overhead expenses "aren't included in Verisk's unit pricing but are typically added to the estimate as a percentage of the total bid along with the appropriate profit margin", while job-related overhead such as a project manager or temporary power "should be added as separate line items" (Verisk on overhead and profit).
Xactimate estimate example: three lines to a net payment
The example below is a small water damage repair in one room. Every number is made up and rounded so the arithmetic is easy to follow. None comes from a price list.
| Line | Quantity | Unit price | Total |
|---|---|---|---|
| Tear out wet drywall and bag for disposal | 120 SF | $1.00 | $120.00 |
| Hang, tape and finish drywall, ready for paint | 120 SF | $3.00 | $360.00 |
| Seal and paint the walls, two coats | 320 SF | $1.25 | $400.00 |
| Line item total | $880.00 | ||
| Overhead at 10 percent | $88.00 | ||
| Profit at 10 percent | $88.00 | ||
| Replacement cost value (RCV) | $1,056.00 | ||
| Less depreciation | ($156.00) | ||
| Actual cash value (ACV) | $900.00 | ||
| Less deductible | ($500.00) | ||
| Net payment on an ACV basis | $400.00 |
Fictional numbers. Sales tax is left out, and the overhead and profit percentages are only an illustration. If the policy pays replacement cost, the $156.00 of depreciation may be paid later, once the work is done and documented.
What is the difference between RCV and ACV on an estimate?
RCV is what it costs to repair or replace today. ACV is that amount less depreciation. The Texas Department of Insurance puts it this way: "Replacement cost coverage pays to repair or replace your house and personal property at current prices", while "actual cash value coverage pays replacement cost minus depreciation" (Texas Department of Insurance).
Which one the policyholder receives depends on the policy, not the software. Tennessee's regulator explains that "Actual Cash Value policies pay consumers for replacement costs minus any applicable depreciation", and that under a replacement cost policy insurers "may initially pay the actual cash value" and "then reimburse the difference following submission of a receipt" (Tennessee Department of Commerce and Insurance). That second payment is why contractors keep invoices and completion records.
Inside the software, Verisk says "built-in depreciation tables make it fast and easy to calculate depreciation", and a payment tracker follows "the actual-cash value and replacement-cost value payments made to the insured" (Verisk).
What file formats does Xactimate export?
The working format is ESX. Verisk states that "ESX is the estimate file format Xactimate uses", and that a PDF is "a flat estimate document" that has to be converted before it can be edited and re-priced (Verisk). Estimates sent to an insurer travel the same way: "a complete estimate (sketch, line items, photos, pricing) submitted over the network in the ESX format carriers already require" (Xactware).
| Format | What it is | Use it for |
|---|---|---|
| ESX | The estimate file, with sketch, line items, photos and pricing | Sending to a carrier, archiving a job you may need to reopen |
| A printed report of the estimate | Sharing with a property owner; reading, not editing | |
| CSV | Line items and component breakdowns, exported from Verisk's XactRestore job software | Job costing and analysis in a spreadsheet |
The certification outline lists "Export/Email PDF File" among report skills (Verisk certification outline), and XactRestore lists a CSV export of "estimate line items and component breakdowns" (Verisk XactRestore). Keep the ESX file for every closed job. A folder of PDFs cannot be re-priced or searched by line item.
What other records does a restoration business keep?
The estimate is only one part of a job file. For water damage, the reference is the ANSI/IICRC S500 standard, which "describes the procedures to be followed and the precautions to be taken when performing water damage restoration in residential, commercial, and institutional buildings" (IICRC). Its listed topics include psychrometry and drying technology, equipment and instruments, and project documentation. The standard is sold by the IICRC and is not reproduced here.
In practice a water damage restoration business keeps the records below. Verisk's job software for contractors lists the same field data: moisture readings "per room or area", equipment usage "across jobs", and "photos, notes, field data" captured on site (Verisk XactRestore).
- Moisture logs: readings by room, material and day, from first visit to dry.
- Drying records: temperature and humidity readings and the equipment placed and removed each day.
- Photos: cause of loss, damage before work, work in progress and the finished repair.
- Authorizations and certificates: work authorization, assignment forms, certificate of completion.
- The estimate and its supplements, with the adjuster's version and the final agreed scope.
- Invoices, subcontractor bills and payment records for each job.
These files matter when a restoration business is for sale. A buyer can check closed jobs against estimates, supplements and payments only if they are complete. For the valuation side, see what is my business worth.
Common mistakes when reading or keeping estimates
Most disputes and most lost history come from a short list of habits.
- Comparing totals instead of lines. Two estimates usually differ on a few items, quantities or the price list date.
- Confusing RCV with the payment. The first check is often ACV less the deductible.
- Assuming overhead and profit are inside the unit prices. Verisk says general overhead and profit are added on top.
- Keeping only the PDF. Without the ESX file the estimate cannot be edited or re-priced.
- Saving the first estimate but not the supplements, so the file does not show what was finally agreed.
- Storing moisture logs and photos apart from the estimate, with no job number to join them.
- Copying price list figures into templates or public documents. The price data is Verisk's.
Restoration job files as a data asset
AI data buyers have asked Origin for records from HVAC, plumbing and restoration contractors. For restoration, that means the job file as a whole: the scope and line items, the moisture and drying readings, the photos, the supplements and what the carrier finally approved.
Three things need checking first. Property owner names, addresses, claim and policy numbers and faces in photos must be removed: see how to de-identify company data before licensing. Verisk's price list data is licensed to you for estimating, so read your software terms before unit prices leave the company; your own scope notes, quantities, readings and photos are yours. And jobs done under a carrier or franchise program may carry confidentiality terms. Related guides: field service records, exporting ServiceTitan data and insurance claims data. Origin is an independent data partner that helps companies get their data bought. A buyer may pay Origin when a deal closes.
Does your company hold records like these? See what your data is worth.
Common questions
What is Xactimate used for?
Writing estimates for property damage repair. Insurers, independent adjusters and restoration contractors use it to sketch the building, list the work as line items, price it from a local price list and produce the report for the claim.
How do I read an Xactimate estimate from my insurance company?
Go room by room through the line items and check each description, quantity and unit of measure against the damage. Then read the summary: line item total, overhead and profit, tax, RCV, depreciation, ACV and deductible.
What does RCV mean on an Xactimate estimate?
Replacement cost value: the estimated cost to repair or replace the damage at current prices, before depreciation and the deductible are taken off.
What does ACV mean on an Xactimate estimate?
Actual cash value: replacement cost value minus depreciation for age and wear. The first payment on many claims is ACV less the deductible.
What is overhead and profit on an Xactimate estimate?
A general contractor markup added as percentages on top of the line items. Verisk says general overhead is not included in its unit pricing and is typically added as a percentage of the total with a profit margin.
What is an ESX file and how do I open it?
ESX is the estimate file format Xactimate uses. It opens in Xactimate and can be imported into Verisk's XactRestore job software. A PDF of the same estimate can be read anywhere but not edited.
What records should a water damage restoration business keep for each job?
The estimate and supplements, moisture and drying logs, equipment records, dated photos, signed authorizations, the certificate of completion, invoices and payments, all under one job number.
Sources and further reading
- Verisk: Xactimate, property claims estimating software
- Verisk: Xactimate User Certification (PDF)
- Verisk: Xactimate platform comparison (PDF)
- Verisk: Overhead and Profit, what is and is not included in Verisk property estimating pricing (PDF)
- Verisk: PDF to ESX conversions with XactRestore Pro
- Xactware: The life of a claim
- Verisk: XactRestore, restoration job management
- IICRC: ANSI/IICRC S500 Standard for Professional Water Damage Restoration
- Texas Department of Insurance: Home insurance guide
- Tennessee Department of Commerce and Insurance: Actual cash value v. replacement cost
