# Licensing Geotechnical Reports and Boring Logs for AI

> Who owns a geotechnical report, and can an engineering firm license old boring logs and lab sheets for AI training? Client limits, location and formats.

Canonical: https://origindatapartners.com/guides/license-geotechnical-reports-boring-logs-ai
By: Origin Data Partners
Status: Published
Published: 2026-11-15
Updated: 2026-11-15
Sources checked: 2026-11-15

## Quick answer

Often yes, for reports the firm wrote, but the client agreement decides. Many engineering agreements leave ownership of reports and logs with the engineer and give the client a right to use them for one project. Confidentiality terms and reliance limits still apply. Public agencies already publish many boring logs, so a private archive is worth most when logs are digitised, paired with lab tests and recommendations, and linked to how the foundation performed.

## Key points

- The services agreement decides ownership. Many leave reports with the engineer as instruments of service.
- Client names, project names and parcels come out. Regional location is part of the value.
- Public boring logs exist in volume. Paired lab data, recommendations and outcomes are what is scarce.
- A licence for training is not a reliance letter. Say so in the terms.

## Can an engineering firm license old geotechnical reports?

Often yes, when the firm wrote the reports and its client agreements leave ownership with the firm. Each agreement still has to be checked for confidentiality terms, and client and site identifiers are removed before anything is delivered.

No public listing read on 15 November 2026 names geotechnical reports as its own category. The nearest is a listing for construction companies (one buyer's public listing, read 15 November 2026), which covers "builders and design firms that keep complete project records" and lists "architecture and engineering firms" among its industries. Its scoping questions include "Do any owner contracts restrict project data?"

So this is an early market. An archive of several thousand logs with lab results is a reasonable thing to describe to a buyer. Nobody can promise that one will bid.


## What is in a geotechnical archive

A geotechnical firm holds more than reports. The reasoning that links field data to a foundation recommendation is spread across six kinds of record.

| Record | What it holds | Why it matters for training |
| --- | --- | --- |
| Boring logs | Depth, strata descriptions, soil classification, blow counts, sample intervals, groundwater | The basic observation: what the ground is at this point |
| Cone penetration soundings | Tip resistance, sleeve friction and pore pressure by depth | Continuous numeric profiles that pair with nearby borings |
| Lab test sheets | Moisture, Atterberg limits, grain size, consolidation, strength tests | Measured properties behind each classification |
| Report text | Site description, design parameters, foundation and earthwork recommendations | The engineering judgement: from data to a decision |
| Field notes and photos | Driller notes, core photos, refusal and cave-in notes | What the log left out |
| Construction-phase records | Pile driving logs, load tests, compaction tests, settlement monitoring | Whether the recommendation held |


## Who owns a geotechnical report?

The services agreement decides. A common position is that the engineer keeps ownership of reports, logs and calculations as instruments of service, and the client receives copies and a right to use them for the project. Some clients, especially public owners, negotiate ownership for themselves.

One county-published engineering agreement shows the usual wording: "All documents, including all reports, drawings, specifications, computer software or other items prepared or furnished by ENGINEER pursuant to this Agreement, are instruments of service with respect to the project. ENGINEER retains ownership of all such documents" ([Converse County agreement](https://www.conversecountywy.gov/AgendaCenter/ViewFile/Item/3461?fileID=4120)). It is one example. Your own agreements may say the opposite.

Copyright follows the same default. The author owns the work, and "A transfer of copyright ownership, other than by operation of law, is not valid unless an instrument of conveyance, or a note or memorandum of the transfer, is in writing and signed" ([17 U.S.C. 204](https://www.govinfo.gov/link/uscode/17/204?type=usc&year=mostrecent&link-type=html)). Copyright covers the written report and drawings. The statute adds that protection does not "extend to any idea, procedure, process, system, method of operation, concept, principle, or discovery" ([17 U.S.C. 102](https://www.govinfo.gov/link/uscode/17/102?type=usc&year=mostrecent&link-type=html)), which is one reason contracts, more than copyright, decide who may reuse the measurements. This page is general information, not legal advice.


## Do client confidentiality and reliance limits block reuse?

They can limit it. A geotechnical report is written for a named client and a named site, and many agreements add a confidentiality clause. Reliance limits protect the engineer from others building on the report. They do not by themselves stop the engineer licensing de-identified data.

The same county agreement states the reliance position: "none of the documents are intended or represented to be suitable for reuse by OWNER or others on extensions of the project or on any other project" ([Converse County agreement](https://www.conversecountywy.gov/AgendaCenter/ViewFile/Item/3461?fileID=4120)). That clause is about design reliance. A training licence should carry it forward: the data is for developing models, and nobody may rely on a log for design at that location.

Confidentiality is the harder clause. Where a client agreement bars disclosure of project information, the choices are to ask the client, to remove everything that identifies the client and site, or to leave that project out. Work done for developers before a land purchase is the most sensitive.


## Do site addresses and coordinates have to be removed?

Client names, project names, street addresses and parcel numbers usually come out, because they identify the client. Exact coordinates are a judgement call. Location is part of what makes a log useful, so generalise it instead of deleting it.

Public agencies publish logs with their locations. Minnesota's transport department says its "state projects have foundation boring and/or cone penetration test logs available for download" ([MnDOT](https://www.dot.state.mn.us/materials/borings.html)). California's archive holds "geotechnical reports, Log of Test Borings, Boring Records, laboratory test results, and other technical data" ([Caltrans GeoDOG](https://geodog.dot.ca.gov/)). The British Geological Survey gives online access to a "collection of over a million onshore scanned boreholes, shafts and well records" ([BGS](https://www.bgs.ac.uk/information-hub/borehole-records/)).

A workable middle course is to keep the county or district, the mapped geologic unit, ground elevation and the spacing between borings on one site, and to drop the address and round the coordinates. Borings on the same site keep a shared site code so they can still be read together.


## Are lab test sheets and field logs included?

Yes, and they should be. A boring log with its lab results and the recommendation that followed is the unit worth licensing. Logs alone compete with the public archives above. The paired set does not.

Keep the sample ID that ties a lab sheet to a depth in a boring. Keep field logs as well as typed final logs, since the differences show how an engineer edits a driller's description. Keep the report section that turns the data into bearing pressures, pile lengths or earthwork limits.


## How far back is a geotechnical archive useful?

Further than most records. The ground at a site changes slowly, so a legible log from decades ago still describes real conditions. What limits old reports is legibility, missing lab sheets and test methods that were not written down.

Format decides the preparation cost. Scanned PDFs need transcription. Logs held in a logging database export far more cleanly. The open standard is DIGGS, "a data transfer protocol for geotechnical data", described by its publisher as "a GML (XML-based) geospatial standard schema for the transfer of geotechnical and geoenvironmental data" ([ASCE Geo-Institute](https://geoinstitute.org/special-projects/diggs)). UK practice uses the AGS data format for the same job.

For older blow counts, record the hammer type and whether the values were corrected. Without that, numbers from different decades cannot be compared.


## Example: one site, report paired with as-built outcome

A fictional firm assembles one warehouse project from 2014. The client name and address are replaced with a site code and a county.

| Piece | Record | Kept or changed |
| --- | --- | --- |
| Field data | Eight boring logs to 15 metres with blow counts and groundwater | Kept; coordinates rounded, site code added |
| Lab data | Moisture, Atterberg limits and two consolidation tests on the clay layer | Kept, with sample IDs |
| Recommendation | Report section: shallow footings rejected, driven piles to dense sand | Kept; client and project names removed |
| Design input | Estimated settlement and allowable pile capacity | Kept |
| Construction | Pile driving logs and one static load test | Kept; contractor name removed |
| Outcome | Two years of floor slab settlement readings | Kept |

Fictional example. The last two rows are what public archives rarely hold: evidence of whether the recommendation was right.


## Common mistakes with geotechnical archives

Most firms hold the right records and lose value in how they are selected and prepared.

- Offering report PDFs alone, without the logs and lab sheets as data.
- Assuming every report is the firm's to license without reading the client agreement.
- Stripping all location, including region and geology.
- Leaving client names in headers, footers and file names.
- Dropping construction-phase records because they sit in a different folder.
- Mixing in reports the firm received from others and did not write.
- Licensing without a term that bars design reliance on the data.


## A geotechnical archive as a data asset

No published range for geotechnical archives was found. The nearest published company range (one buyer's public listings, read 15 November 2026) is the construction listing, which runs from $115,000 to $1 million for builders and design firms with complete project records and site imagery. Read it as a ceiling for a much broader set, not a typical outcome for logs and reports.

A firm that is merging, retiring a logging system or closing an office has a reason to inventory the archive now. There is no standard timetable. The order is usually the same: a written description of the archive, a small sample, a rights review, agreed terms, then delivery. The rights review sets the pace. Related record types are covered in the [construction project records guide](https://origindatapartners.com/guides/sell-construction-project-records-ai), the [guide for contractors](https://origindatapartners.com/guides/construction-contractor-data) and the [seismic and well log guide](https://origindatapartners.com/guides/license-seismic-well-log-data-ai). Origin Data Partners is an independent data partner that helps companies get their data bought. A buyer may pay Origin when a deal closes.

Does your company hold records like these? [See what your data is worth](https://origindatapartners.com/check-fit).


## Questions and answers

### Who owns a geotechnical report: the engineer or the client?

The services agreement decides. Many agreements say reports and logs are instruments of service and the engineer retains ownership, with the client licensed to use them for the project. Public owners sometimes negotiate ownership for themselves.

### Can an engineering firm license old boring logs to AI companies?

Often yes, for logs the firm produced under agreements that leave ownership with the firm and do not bar disclosure. Client and site identifiers are removed first. No public listing read on 15 November 2026 names boring logs as its own category.

### Do site addresses have to be removed from boring logs before licensing?

Addresses, parcel numbers, client names and project names usually come out because they identify the client. Keep the region, geologic unit, elevation and boring spacing, and round the coordinates, so the logs stay useful.

### Are geotechnical lab test sheets included in a data licence?

They should be. A log paired with its lab results and the recommendation that followed is the unit with value. Keep the sample IDs that tie each test to a depth in a boring.

### How far back are old geotechnical reports useful for AI training?

Decades, if they are legible and complete. Ground conditions change slowly. Old reports lose value when lab sheets are missing or when the hammer type and corrections behind the blow counts were not recorded.

### Are public boring logs already available to AI developers?

Yes, in volume. State transport departments publish boring logs, and the British Geological Survey offers over a million scanned borehole records. A private archive stands out through lab data, recommendations and construction outcomes.

## Sources

- [Converse County, Wyoming: short form agreement between owner and engineer (PDF)](https://www.conversecountywy.gov/AgendaCenter/ViewFile/Item/3461?fileID=4120)
- [17 U.S.C. 204: execution of transfers of copyright ownership](https://www.govinfo.gov/link/uscode/17/204?type=usc&year=mostrecent&link-type=html)
- [17 U.S.C. 102: subject matter of copyright](https://www.govinfo.gov/link/uscode/17/102?type=usc&year=mostrecent&link-type=html)
- [Minnesota DOT: boring and sounding logs and geotechnical reports](https://www.dot.state.mn.us/materials/borings.html)
- [Caltrans: GeoDOG, digital archive of geotechnical data](https://geodog.dot.ca.gov/)
- [British Geological Survey: borehole records](https://www.bgs.ac.uk/information-hub/borehole-records/)
- [ASCE Geo-Institute: DIGGS, data interchange for geotechnical and geoenvironmental specialists](https://geoinstitute.org/special-projects/diggs)

## Related reading

- [Sell Construction Project Records to AI Companies](https://origindatapartners.com/guides/sell-construction-project-records-ai)
- [Construction Project Data for AI: A Contractor's Guide](https://origindatapartners.com/guides/construction-contractor-data)
- [Who Owns Seismic and Well Log Data? Licensing It to AI](https://origindatapartners.com/guides/license-seismic-well-log-data-ai)
- [Licensing CAD files and engineering data to AI companies](https://origindatapartners.com/guides/license-cad-engineering-data-ai)
- [Project Closeout Checklist: Construction Closeout Documents](https://origindatapartners.com/guides/construction-closeout-checklist)
- [Licensing Construction Estimates, Takeoffs and Bid History](https://origindatapartners.com/guides/license-construction-estimates-bid-history-ai)
